Water heater sediment removal tool
Turbo Tank Cleaner
Remove the Sediment Ordinary Flushing Leaves Behind.
Use a variable-speed cordless drill and standard garden hose to loosen, process, and remove settled sediment through the drain opening.
- 40,000+ units sold
- 2,000+ Amazon ratings
- Gas & electric tank-style heaters
Why it works
Why Flushing Can Leave Sediment Behind.
Flushing sends water across the bottom of the tank and out through the drain valve. Loose particles may move, but settled chunks and compacted buildup can remain because water alone does not break them apart.
-
Reach settled buildup
The flexible spring travels through the removed drain-valve opening to work where sediment settles.
-
Break it into movable pieces
Low-speed mechanical agitation loosens deposits and reduces larger pieces before they reach the drain path.
-
Move it out with visibility
Water carries loosened material through the clear housing and out through a standard garden hose.
Tank condition, sediment type, access, preparation, and operator technique can affect the result. Always follow the current instructions and your water heater's manual.
Real result
See the Sediment Come Out.
This short clip shows sediment collected after a Turbo Tank Cleaner demonstration. The amount and consistency will vary from tank to tank.
Watch the full product demonstration
A serious DIY maintenance tool
Built for a Prepared Homeowner.
The job uses familiar tools, but it still involves hot water, pressure, gas or electricity, and model-specific shutdown steps. Prepare the heater correctly and stop when your manual or the product instructions call for professional help.
- Common tools Uses a variable-speed cordless drill and standard garden hose.
- Broad tank compatibility Designed for compatible gas and electric tank-style heaters with a removable standard ¾-inch NPT drain opening—not tankless units.
- No full pre-drain After proper shutdown, cooling, depressurizing, and installation, the tank is refilled completely before the tool is operated.
- Clear housing See water and loosened sediment move through the tool while you work.
Tank confidence
Designed for Controlled, Low-Speed Use.
The cleaning action is built around a smooth flexible drain-auger-style spring—not a rigid blade—and controlled operation with water in the tank.
- Smooth flexible spring The coil bends and absorbs force as it moves instead of presenting a rigid cutting edge.
- Water adds resistance Operating with the tank completely full adds resistance around the spring while it works.
- Low speed is enough Begin at the drill's lowest setting. High RPM is not required for the tool to work.
40,000+ units sold We have received no reports of lining damage.
Read the full tank-confidence explanationKnow before the job
What Comes With It—and What You Supply.
Turbo Tank Cleaner is the specialized part of the setup. The remaining tools are common maintenance equipment.
Included
- Turbo Tank Cleaner assembly with clear polycarbonate housing
- Attached flexible steel agitator spring
- Current operating instructions
You supply
- Variable-speed cordless drill
- Standard garden hose and an appropriate discharge route
- Wrench and model-specific tools for removing and reinstalling the stock drain valve, plus a bucket, protective equipment, and any other items called for by the instructions
Optional maintenance parts
Make the Next Water-Heater Job Easier.
Turbo Tank Cleaner works after the stock drain valve is removed. These optional products are not required to use the cleaner, but they can simplify future service or replace compatible electric-tank elements.
Optional accessory
Full-Port Water Heater Drain Valve Kit
Replace a compatible tank's stock valve with a 19 mm full-port ¾-inch NPT valve. Its female ¾-inch NPT outlet accepts Turbo Tank Cleaner directly, so the replacement valve can stay installed for future cleanings.
For compatible gas or electric tank-style heaters with a ¾-inch NPT drain connection. Confirm the connection before installation.
View the drain valve kit
Optional accessory
4500W Stainless Steel Water Heater Elements (2-Pack)
Two 316 stainless screw-in elements with gaskets for compatible 240V electric tank-style water heaters.
4500W · 240V · 1-inch NPSM · electric tank-style heaters only
View the element 2-packQuestions before you buy
Make Sure It Fits the Job.
These are the questions that most often decide whether Turbo Tank Cleaner is the right next step.
Read every product FAQWill it work with my water heater?
It is designed for compatible gas and electric tank-style water heaters with a removable standard ¾-inch NPT drain opening. Using it requires unscrewing the stock drain valve so the tool can install directly in that opening. It is not a tankless descaling tool. Confirm access and follow the exact heater manual before starting.
Do I drain the tank before using it?
A full pre-drain is not normally required. The heater must still be shut down, cooled, and depressurized, and the stock drain valve must be removed for installation. The tank is then completely refilled before the spring is operated. Follow the current instructions and your model's manual.
Can the spring damage the tank?
The tool uses a smooth flexible coil, low-speed operation, and water resistance rather than a rigid blade. Those design choices are intended to reduce concentrated force, but careful preparation and operation are still required; no tool can make every tank or misuse risk-free.
How is this different from ordinary flushing?
Flushing relies on water flow to carry loose material to the drain. Turbo Tank Cleaner mechanically reaches settled buildup, breaks larger pieces into movable material, and lets you watch the discharge through the clear housing.
Can I use it on a tankless water heater?
No. Tankless units use model-specific maintenance and commonly require a descaling process. Follow the tankless manufacturer's instructions instead.
Ready when your tank is
Remove What Flushing Leaves Behind.
See the current offer, review the instructions, and clean with a clear understanding of the job before you begin.